LT10M Manual Pallet Tilter, LT10E Eelectric Pallet Tilter

Introduction of pallet tilter

LT series lift and tilt pallet jack are designed to lift the pallet and tilt it to the ergonomic angle. LT10M manual pallet tilter & LT10E electric pallet tilter are worked to allow the users to ergonomically reach loads easily without having to bend down or over-stretch. The Electric tilt pallet jack has forced steering on one wheel to make manoeuvring easy. Lift /lower functions are controlled by a switch on the control lever. Tilt/return functions are controlled by a remote control, which is fitted with a long wire, and can make the operator and the tilter with load keep a certain distance, more safer. Lift /lower function and Tilt/return functions can be operated independently of each other or simultaneously. When Tilt/return functions are to be used, the tilter must be on a firm surface, and the universal wheel shall be braked. When Tilt/return functions are to be used to stack materials, the handle can be turned to the side to make access to the stack table easier.

As a pallet tilting equipment, this pallet jack tilter can be used as a pallet truck and also a tilting pallet truck, this can not only improve your work efficiency, but also save costs.

Ročaj je mogoče zasukati in zaskočiti v položaju, ki ni stran od delovnega območja. Velja za sedeče in stoječe položaje. Roglje vilic palete se lahko nagnete do 90 stopinj. Oba sta serijsko opremljena z parkirnimi zavorami in ščitniki za noge.

V skladu z EN1757-1 in EN1175

Details of pallet tilter

LT0M manual pallet tilter LT10E electric pallet tilter

We have this item in stock in France/US, if you are located in Europe or US, we can arrange delivery to you ASAP! This way will save your time and shipping cost.

Specifications of pallet tilter

i-dvig št.		1520902	1520903
Model		LT10M	LT10E
Vtipkajte		Priročnik	Električni
Zmogljivost	kg (kg)	1000(2200)
Dvižna višina, navpično	h mm (v.)	285(11.2)
Najmanjša višina vilic	h1 mm (in.)	85(3.3)
Dolžina vilic	I mm (v.)	800(31.5)
Višina ročaja	L1 mm (in.)	1138(44.8)
Skupna širina vilic	b mm (v.)	560(22)
Širina med vilicami	b1 mm (in.)	234(9.2)
Dolžina konice vilic iz valjarja	L2 mm (in.)	135(5.3)
Skupna širina	B mm (v.)	638(25.1)
Celotna dolžina	L mm (v.)	1325(52.2)	1410(55.5)
Skupna višina, dvignjena	H mm (v.)	950(37.4)
Skupna višina, Spuščena	H mm (v.)	750(29.5)
Središče za nalaganje Min./Maks.	C1 mm (v.)	200/400(8/16)
Središče za nalaganje Min./Maks.	C2 mm (in.)	200/420(8/16.5)
Napajalna enota	KW / V	--	0.8/12
Neto teža	kg (kg)	178(391.6)	185(407)

Varnostna pravila

1. Driving the pallet tilter on the slope

1) The pallet tilter shall be unloaded or a small load.

2) Tovor mora biti v najnižjem položaju.

3) The gradient shall be no more than 2° when dragging the pallet tilter.

4) Upravljavec je na zgornjem mestu, bodisi nadgradnjo ali znižanje.

2. Avoid offset loads

Obremenitev je treba enakomerno porazdeliti na vilice ali palete, z razdaljo 400 mm med težiščem in sprednjimi vilicami, največja višina težišča je 420 mm, najmanjša je 200 mm, oddaljenost od tega območja pa bo zmanjšala raven varnost in povečanje tveganja.

Blago na palete ali vilice mora biti pravilno zavarovano, izogibajte se neravnovesju tovora, tako da med prevozom ne bo odpadlo, ko je tovornjak dvignjen ali ko mora tovornjak nekaj časa dvigati.

3. Driving loaded

The tilting pallet jack is designed for use on even and level floor. During transport the forks shall be raised as little as possible. Transport with raised forks should be made over the shortest possible distances and at low speed. Do not transport when tilting goods on the pallet tilter, this is not safe.

Opozorilo: Nikoli ne postavljajte rok ali nog na gibljive dele, saj to lahko povzroči poškodbe.